We offer timely service and maintenance calls on all types of cast tower and church bells.
Restoration of the 1909 steel church bell. Bell and bell hardware powder coated with new stainless steel bell frame .
Coastal Clock and Chime was pleased to be part of the Historic Church Bell Restoration for the First Baptist Church of Colonial Williamsburg. Working with the Colonial Williamsburg Foundation and the First Baptist Church, Carl Rickershauser owner of Coastal Clock and Chime lowered the bell from its perch high in...
This bell is located in Metuchen NJ at St. Luke's Episcopal Church On this visit we serviced bell this included, replacing the ringing cable, tightening the head bolt, replacing the clapper pin.
Initially, we were called to Pine Grove Baptist Church for a broken rope replacement job. When we arrived, we noticed that the structure housing the bell was scarred and rotted. It no longer supported the way to the bell. We checked further and saw that the mounting bolts had rusted away and caused multiple problems with...
We regularly do service checks on bells and clocks. Scheduled and consistent maintenance will help bells and clocks last longer. We also look out for smaller issues before they turn into more significant problems for our clients. We did a service check on St. James Roman Catholic Church in Trenton,...
We went out to Brookhaven New York and serviced the bell at Old South Haven Church. Regular service is an integral part of keeping church bells in the best shape possible. We look forward to going out to Old South Haven Church in the future.
The 1892 McShane bell of Immaculate Conception Church needed new ringing equipment. After getting several quotes on the bell repairs Father chose Coastal Clock and Chime of Cinnaminson, NJ . The hardware of the bell was cleaned, inspected and damaged and worn parts were replaced. New ringing equipment was installed...
Restoration of a 35 inch steel bell with rope pull. The steel bell had severe rust problems and missing clapper springs. The clapper was worn flat and thru in one spot. The bell was hard to ring due to a bent wheel and shifting A-stands. As seen in the above...
Church Bell rings out in Sag Harbor once again. The cast bronze bell of Christ Episcopal Church of Sag Harbor, NY was silenced when it was discovered the 2000 pound bell had shifted in its mounting . The Meneely Bell which had been rope rung by the congratulation since 1908...
Our restoration of the historic church bell ringing system for St. James' Episcopal Church of Eatontown, NJ is another example of our use of the best equipment at the most reasonable price, evoking a high degree of customer satisfaction. The bell was manufactured by Meneely Bell Company in 1868.
To enable pealing of three church bells easily and safely, we installed new ringing equipment to existing bells. Local electricians have finished the final wiring of new bell ringing equipment installed by Coastal Clock and Chime Co. of Cinnaminson, NJ. The old ringers installed in 1957 were replaced with low torque bell...
We furnish regularly scheduled maintenance to the five Paccard bells of St. Paul Cathedral in Minnesota. upgraded and installed new swingers and control equipment in 2009 on the five Paccard bells installed in 1986. As part of the installation the bells will be inspected and serviced twice a year. It...
We installed a digital bell controller for the existing bell ringer. This digital equipment was a replacement for the Montgomery style bell controller typically in use for cast bell ringing installations through out the United States before the advent of digital technology. Fr. James of St. Ann's was very pleased...
The historic bell of Chapel of the Cross Church in Chapel Hill, NC was removed from the bell tower by Carl Rickershauser, owner of the Coastal Clock and Chime Co. of New Jersey. The 600 pound bell was fitted new mounting and swinging hardware. "The Church decided to...
Remounted bell with new shackles and bolts to stabilize bell sufficiently to allow safe pealing and tolling, as well as ringing longevity, as seen in the above photo.
After letting the church bells go without service for several years, Malaga United Methodist Church called Carl Rickershauser the owner of Coastal Clock and Chime Co. to see what could be done with the bells. “The church just wanted to see if it could be fixed. Every other bell company...
Carl Rickershauser Owner of Coastal Clock and Chime Co. was on hand as the bell was hoisted into place in St.Stephen's newly renovated steeple. The bell had spent the last month at his Cinnaminson, NJ shop waiting to be rehung after it was cleaned and readied for reinstallation. Reverend Robert Legnani was...